Company News

Nowadays, copper tubes have been used in electronic industries such as household appliances, water heaters, solar energy, automobiles, etc., and the demand is also increasing, which also makes the sales volume of copper tubes become better and better.

Friction stir welding uses friction heat and plastic deformation heat while welding heat sources. The difference between friction stir welding and conventional friction welding is that friction stir welding involves a cylinder.

The CPU water-cooled radiator refers to the use of liquid to forcibly circulate and take away the heat of the radiator driven by a pump.

As we know that nowadays that the thermal dissipation products had been innovated for many kinds, such like the air cooling with active cooling or passive cooling, air cooling heat sink is been a long while for the period of heat sink, or the representative heat sinks.

For high-advanced electronic products, it is required that the cooling structure occupies as little space as possible, the lighter the better, and the more reliable the better perform.

Vapor chamber is a vacuum chamber with microstructure on its inner wall. When heat is conducted from the heat source to the evaporation area, the working gadgets in the chamber will start to produce liquid phase evaporation in a low vacuum environment.

Background for techniques : The skiving heat sink breaks through the limitation of thickness-length ratio of conventional radiators, and can produce radiators with high density.

Friction welding is a method that uses the heat generated by the mutual movement and friction of the end faces of work pieces to make the end parts reach thermoplastic state, and then quickly formed to complete welding.

Water Coolers: This method of heat sinking is a bit difficult to introduce to your computer. Only a professional person with appropriate equipment can install it properly.

In nowadays almost every field of equipment and facilities all are adopting heat sinks or water cold plates. However，the heat dissipation problem is one of the problems at the LED design. In this article we proposed a design method to replace fins for outdoor LED stage lights, To be compared between the commercial fins and thick buckle fin.

Optimum analytical design of medical heat sink with convex parabolic fin including variable thermal conductivity and mass transfer

It’s a new way of working that our foreign trade department have the product thermal engineer who is giving us the best help!!